Description

It doesn’t need much space and the “playground” is made quickly. Simply throw a few cushions on the floor or build a course at your desk at lunchtime and the fun can begin! Thanks to the proportional radio remote control, the finest driving maneuvers are possible to overcome even the most complicated-looking obstacles.  

The “V2 Evolution Upgrade” raises this little powerhouse to a level never seen before in its class!

New EVO Features and Functions

• New* oversized 130 “Crawler Spec” brushed motor (100T)
• New* developed 2-speed steel gear shift (switchable on radio CH3)
• New extreme portal axles with steel gears for even more ground clearance
• New* motor mount (even for bigger motors like 180 & 240 size)
• New* reinforced drive shafts front & rear
• New* LCG-optimized chassis layout (Low Center of Gravity)

and also…

• 2.4GHz radio system
• Vehicle lighting operated from the transmitter (CH4)  
• Oversize 1.2″ AT wheels with internal beadlock system
• 1kg steering servo with panhard bar
• PPX4 water-resistant electronics
• Metal chassis frame
• Painted 1.2mm Lexan body
• Tight turning circle of 80cm 
• Driving time of up to 45 minutes    
• Steering angle of up to 45°
• Maximum ground clearance thanks to portal axels and 1.2″ wheels

Portal axles front and rear for increased ground clearance

LED lighting front and rear. Operated via channel 4 on the transmitter

Newly developed and reinforced front and rear drive shafts

Specially developed portal axle with new drive ratio. This ensures a butter-soft response at low speeds and even more torque. The new axle also achieves a steering angle of up to 45°. The gearbox in the axles is made of tool steel. 

Newly developed 2-speed high-performance gearbox – 1st gear ratio: 98:1 / 2nd gear ratio: 24.5:1 switchable via CH3 on the remote control. Gears made of tool steel is also used here.

The motor mount is compatible with brushed and brushless motors up to a size of 240

      Super-soft 1.2″ “All Terrain” wheels with internal bead lock design

Simple, balanced and easily accessible “LCG” chassis layout with high-performance drivetrain 

• Scale: 1:18
• 4WD all-wheel drive
• 2.4GHz radio system    
• “High Torque” 2-speed steel gears, 1st gear ratio: 98:1 / 2nd gear ratio: 24.5:1(CH4)
• 100T / 130size brushed motor
• Differentials fully locked (front & rear)
• Telescopic UJ cardan shafts
• Metal chassis frame
• Drag/Mountain brake (prevents rolling on hills)
• Digital proportional control for sensitive driving maneuvers
• LED lighting (CH4)
• Scale body with many attachment parts
• 1.2″ bead lock wheels with super soft AT tires 
• Waterproof 1kg mini steering servo
• 2-in-1 speed controller/receiver unit
• Driving time: approx. 45 minutes

• Speed controller: 2-in-1 ESC/RX unit, PPX4, 10A/50A
• Remote control: 2.4GHz, 4-channel
• Steering servo: 1kg actuating force, waterproof
• Motor: 100T – 130 oversize
• Newly developed 2-speed gears
• Steel drive and portal axle gears
• Gear ratio: 1st gear: 98:1 / 2nd gear: 24.5:1
• Battery: LiPo 7.4V/2S 600mAh
• Battery connector system: Molex 2-pin
• Wheelbase: 158,5mm
• Ground clearance: 43,7mm
• Track width: 110mm
• Length: 241mm
• Width: 125mm
• Height: 130,8mm
• Weight: 430g (incl. drive battery)
• Wheels: 19.5x58mm

   

• 1* Mini EVO Crawler
• 1* 2.4GHz radio system
• 1* LiPo battery 7.4V 600mAh
• 1* USB charging cable
• 1* Sticker sheet
• 1* Manual DE/EN/FR
• 1* Mini tool set

4* AAA Batteries for the radio