Description

Picture shows green version

“Dune Bashing!” If your lawn is just a desert and the creek in front of your door resembles a clay track, then make the best of it – let the ASB1 out for a play!  Modeled after the big sand buggies that are all the rage in Dubai, the ASB1 comes with an open cage and plenty of driving fun. Jumps, races, let the dust fly – do what you want, your ASB1 knows no limits. This is ensured by the best plastic components and a completely covered chassis. You also get your charger and the matching battery on top. Treat yourself to the fun of the sheikhs and start your “Dune Bashing”.
 

! BLUE VERSION !

• Water-proof 40A Speed Controller
• 15T Brushed Motor
• 2.4 GHz Radio System
• Battery and Charger (EU Power Socket)

Picture shows green version

• Fully assembled and equipped all-wheel drive buggy incl. 2.4 GHz remote control, NiMH high performance battery and charger 
• Waterproof and LiPo compatible 40A brushed controller with Tamiya plug 
• Water resistant and powerful steering servo with a actuating force of 4kg 
• 15 turn 550 size brushed motor with heat sink 
• Fully enclosed main drive – prevents the ingress of stones or other foreign objects 
• Aluminum cardan drive shaft with steel hubs 
• The vehicle is completely ball bearing mounted and therefore with a smooth and durable run 
• Two built-in cone differentials transmit the torque optimally and compensate for speed differences, e.g. when cornering 
• Differential outputs made of steel 
• The oil shock absorbers can be perfectly adjusted to any slope via a knurled screw 
• Aluminum motor mount
• Steel CVD shafts on front axle
• Track rods adjustable via right/left-hand thread 
• Dirt cover for the electronic components (speed controller, receiver and battery) 
• 3mm aluminum shock towers V/H
• Designed for brushless operation
• Extremely durable body
• The reinforced plastic parts are on the one hand very resistant and provide on the other hand the necessary degree of deformation to survive some “accident” without any damage 

CAUTION: If you want to run brushed vehicles with a LiPo battery, the battery must not exceed a C-rate of 30C. The controller, motor and connections can otherwise become very hot, which can lead to damage!             

Vehicle Technical Data:

• Dimensions (L/W/H): 430x285x155 mm
• Weight: 2170 g
• Wheelbase: 293 mm
• Ground Clearance: 40 mm
• Track front/rear: 230 mm
• Wheels Ø front/rear: ±  105 mm / Width 50 mm
• Viskosity Shock Oil: 400CPS v/h
• Shock spring strength: medium
• Shock installation length front/rear: 85mm
• Viscosity Differential Oil: 1.000CPS front / 3.000CPS rear
• Internal gear ratio: bevel pinion 13T / ring gear 43T 
• Motor ratio : main gear 55T / motor pinion 20T (module 0.8) 

Speed Controller Technical Data: 

• Water-proof 40A Brushed Speed Controller
• NiMH/LiPo operation
• Peak current: 180A
• Functions: Vorward / Brake / Backward
• BEC 5V / 2A 
• Operation V: 7.2 – 7.4V
• Motor limit > 12T @  7.4V; < 30.000 U/min @ 7.2V
• Plug system: Tamiya

Thrust ECO Motor Technical Data:

• 15T / 30.000 U/min
• 550 size
• Motor shaft: Length 9,6mm; Ø 3,17mm
• Motor size: Length 57 mm; Ø 36,7 mm 

Servo S40PH Technical Data: 

• Size: Standard
• Actuating force: 4,0 kg @ 4.8V
• Actuating time 0,16 Sec / 60° @ 4.8V
• Gears: Nylon
• 25 teeth
• Plug system – JR
• Voltage: 4.8V – 6.6V
• Ball bearing

Radio System Technical Data: 

• 2-CH radio CR4S
• 3-CH mini receiver
• Reverse function
• Adjustable dual rate and trimming
• Battery case for 4 Mignon AA cells (not included)

Scope fo delivery: 

• 1* Sand Buggy ASB1 RTR
• 2.4 GHz Radio System CR4S
• NiMH Racing Pack 
• Plug Charger (EU socket)
• Manual

Required Accessories:

• 4* AA Mignon batteries for the radio