Description
Elceram Oxide 1/10 Competition Brushless ESC
Product code: ELC008
The new face of future is coming. Revolution comes also to Stock racing.
- OXIDE 1/10 is a new generation electronic speed controller for BLDC sensored motors optimalized specially for Stock and Open-Stock racing onroad and offroad, but suitable for many other categories including Modified or Drift as well.
- Using Advanced Cooling Technology based on Aluminium Oxide Ceramic Flat Cooler, OXIDE 1/10 provides TFT LCD color display allowing very quick and easy adjustment of all parameters, post-race data evaluation and self-diagnostics without need of any other interface.
- All these great features packed into Stock low profile design.
- Perfect for Stock, convenient for Modified and Drift with motors from 6T up.
Features:
- Developed especially for 1/10th professional RC cars. Buggy, Touring, Drift, etc.
- Ideal solution for high level stock racing (standard, expert, open stock).
- Suitable also for modified with motors from 6T up.
- TFT LCD color display with resolution 160 x 80 pixels.
- Size: 38,3 (L) x 34,3 (W) x 20 (H) mm.
- Weight: 45 g without wires / 75 g with wires AWG14 – 180 mm.
- Ultra low centre of gravity.
- Power supply: 2S LiPo.
- Current cont. / pulsed: 145 A / 1500 A.
- BEC: 6 – 7,4 V adjustable, step 0,05 V.
- Extreme low internal resistance based on silver conductive layer.
- Advanced Cooling Technology based on Aluminium Oxide Ceramic Flat Cooler.
- Designed for high level RC racing.
- Zero Timing (Blinky Mode) supported.
- For sensored BLDC motors from 6T up.
Functions:
- Revolutionary easy Rx calibration.
- Realtime monitoring: battery voltage, ESC and motor temperatures.
- Self-diagnostic before the race: motor temperature, sensor cable, battery.
- Post-race data evaluation.
- Easy programming: throttle, brake, boost and turbo timing, hall angle, BEC and many other functions.
- Continuous BEC volatge monitoring.
- Continuous motor speed monitoring.
- RPM limiter supported.
- Race data logging, temperature and other curves, histograms and more.
- Adjustable maintenance reminder for easy check.
- No programming interface needed.
- Thoroughly tested under race conditions.
Advanced Cooling Technology based on ceramic and Thick Film Technology
- Advanced cooling technology based on compact Aluminium Oxide cooler, developed especially for OXIDE.
- OXIDE 1/10 is light and compact version of ESC, exactly the one you need not only for Stock racing. The centre of gravity is ultra low for even better stability of your car.
- Power MOSFET´s transistors are attached on very thick silver layer with low resistance and high current capability. The silver layer is fired directly on Aluminium Oxide cooler using temperature above 850 °C for excelent longterm reliability and thermal shock stability.
- The power stage – the most heavy component – is all way down.
- Despite the Stock dimensions and weight, OXIDE provides the TOP features and functions that you appreciate not only in Stock and Open-stock, but also in all other categories, including Modified or Drift with motors 6T and more.
LCD Display:
- As you got used to by ELCERAM speedos, OXIDE 1/10 is endowed with necessary LCD color display. Thanks to this you can set all the parameters and check all data directly at your ESC, without need of any programming card or a mobile application. All you need is inside your ESC. The use is really easy – by 3 buttons you can quickly set anything you need and one view is enough to check all parameters necessary for race. Simply. Quickly. Precisely.
Proven and NEW functions:
Thanks to the display, you can have always overview about all the important data and events – before the race, during driving and after race. It is really quick to make a change in your settings and then you have immediate feedback, without any delay caused by connecting a control interface. In adition to the proven ones, OXIDE 1/10 is endowed by great new and revolutionary functions:
- adjustable BEC voltage from 6 – 7,4 V with step 0,05 V
- revolutionary continuous BEC voltage monitoring
- continuous motor speed monitoring
- throttle sensitivity adjustable
- minimum brake and drag brake independently adjustable
- turbo timing instant function possible
- RPM limiter adjustable from 10.000 rpm up to 60.000 rpm with drop function
- graphs customazitation, record lenght, autoreset function, etc
Quick and easy installation:
- Installation of OXIDE is quick and easy – you can stick it directly to the chasis of your car using a double-sided tape included in the package. For example tape type 3M 5915.
- If better cooling effect desired, you can stick the OXIDE on any thermal conductive plate (for example aluminium) in the car.
- In addition, the cover of ESC with display and buttons is able to be changed simply in case of any accident.
Reviews
There are no reviews yet.