Absima AT3.4-V2 BL 1:10 4WD Brushless Truggy RTR

The AT3.4-V2 BL features an aluminium centre driveshaft and separate front and rear differentials. Handling is supported by a 15 kg metal gear steering servo and four adjustable aluminium oil-filled shock absorbers. Spring preload can be fine-tuned using threaded adjustment collars, allowing the chassis setup to be adapted to different surfaces and driving styles.

Thanks to its lower centre of gravity, wide 325 mm overall width and 105 mm wheels, the truggy offers stable and precise handling while still providing approximately 35 mm of ground clearance for driving on uneven terrain. The roof-mounted LED lighting adds a distinctive look and improves visibility in lower light conditions.

The programmable 60A brushless ESC is waterproof and equipped with a T-Plug battery connector. For the best balance between performance, handling and drivetrain durability, Absima recommends using a 2S 7.4V LiPo battery. The electronics can also operate with a 3S LiPo battery, but Absima does not generally recommend 3S use because the significantly higher power increases drivetrain wear and makes the vehicle much harder to control.

The included CR4S 2.4 GHz 4-channel transmitter provides trim, Dual Rate and channel reverse adjustments. Beginner Mode reduces the maximum speed by approximately 50%, making this powerful brushless truggy easier to handle for less experienced drivers.

Battery and charger are not included. Suitable options can be found in our 2S LiPo batteries category together with a compatible LiPo battery charger. A wide range of Absima spare parts and upgrade parts is also available for the AT3.4-V2 platform, making maintenance, repairs and further upgrades easier. Explore also our other Absima RC models and accessories.

Key Features

• 1:10 scale brushless truggy
• 4WD drivetrain
• Top speed up to 60 km/h
• 3421KV sensorless brushless motor
• Programmable 60A / 360A brushless ESC
• Waterproof ESC
• T-Plug battery connector
• 15 kg metal gear steering servo
• 2.4 GHz 4-channel CR4S radio system
• Beginner Mode – approximately 50% speed reduction
• Roof-mounted LED lighting
• Four adjustable aluminium oil-filled shock absorbers
• Front and rear differentials
• Aluminium centre driveshaft
• Steel differential outdrives
• Adjustable upper links
• 5 mm aluminium motor mount
• 6 mm shock towers
• Ball-bearing drivetrain
• Durable composite chassis and suspension components
• Lightweight chassis design
• Wide range of spare and upgrade parts available

Technical Specifications

• Scale: 1:10
• Drive: 4WD
• Motor: 3421KV brushless, sensorless
• ESC: 60A / 360A brushless
• Battery connector: T-Plug
• Recommended battery: 2S / 7.4V LiPo
• Maximum speed: up to 60 km/h
• Steering servo: 15 kg, metal gears
• Motor pinion: 23T
• Main gear: 64T, Module 0.6
• Dimensions (L × W × H): 405 × 325 × 165 mm
• Wheelbase: 270 mm
• Track width front/rear: 270 mm
• Ground clearance: approx. 35 mm
• Wheel diameter: 105 mm
• Wheel width: 55 mm
• Shock oil: 400 CPS
• Shock absorber length: 90 mm
• Weight: 1780 g

Included

• Absima AT3.4-V2 BL 1:10 4WD Brushless Truggy RTR
• CR4S 2.4 GHz 4-channel transmitter
• Sticker sheet
• Instruction manual

Required for Operation

• 2S 7.4V LiPo battery with T-Plug connector
• Suitable LiPo battery charger
• 4 × AA batteries for the transmitter

An optional Absima programming box (2110062) is available separately and allows adjustment of ESC settings such as braking force, punch and LiPo low-voltage protection.

NB – Battery usage

• Always disconnect the battery after use
• Do not fully discharge the battery
• Only charge with a suitable charger
• Store in a cool, dry place